Low temperature monoblock unit

Diamond AN120-PED/A

температура от -22 до -18 °C, dimensions: 460x845x760 mm

Diamond AN170-PED/A

температура от -22 до -18 °C, dimensions: 460x845x760 mm

Diamond AN201-PED/A

температура от -22 до -18 °C, dimensions: 760x845x760 mm

Diamond AN202-PED/A

температура от -22 до -18 °C, dimensions: 760x845x760 mm

Diamond AN400-PED

температура от -22 до -18 °C, dimensions: 760x1060x860 mm

Diamond SN120-PED

температура от -22 до -18 °C, dimensions: 460x540x750 mm

Diamond SN170-PED

температура от -22 до -18 °C, dimensions: 460x540x750 mm

Diamond SN201-PED

температура от -22 до -18 °C, dimensions: 760x540x800 mm

Diamond SN203-PED

температура от -22 до -18 °C, dimensions: 760x540x800 mm

Diamond SN400-PED

температура от -22 до -18 °C, dimensions: 760x620x970 mm

Emmepi MB10-13N-T

температура от -25 до -18 °C, dimensions: 800x370x50 mm

Emmepi MB10-20N-T

температура от -25 до -18 °C, dimensions: 800x370x50 mm

Emmepi MB10-6N-T

температура от -25 до -18 °C, dimensions: 800x370x50 mm

Mastro GURB11AR

optimal cooled volume of chamber - 12.32 m³, температура от -25 до -10 °C

Mastro GURB24AR

optimal cooled volume of chamber - 4.16 m³, температура от -25 до -10 °C

Mastro GURB46AR

optimal cooled volume of chamber - 6.08 m³, температура от -25 до -10 °C

Mastro GURB61AR

optimal cooled volume of chamber - 9.68 m³, температура от -25 до -10 °C

Mastro VACK300

optimal cooled volume of chamber - 9.3 m³, температура от -25 до -18 °C, dimensions: 760x1070x820 mm

Mastro VACK400

optimal cooled volume of chamber - 16.5 m³, температура от -25 до -18 °C, dimensions: 760x1070x820 mm

Mastro VAK170

optimal cooled volume of chamber - 2.6 m³, температура от -25 до -18 °C, dimensions: 485x845x720 mm

Mastro VAK201

optimal cooled volume of chamber - 3.4 m³, температура от -25 до -18 °C, dimensions: 785x845x720 mm

Mastro VAK202

optimal cooled volume of chamber - 4.6 m³, температура от -25 до -18 °C, dimensions: 785x845x720 mm

Mastro VAK203

optimal cooled volume of chamber - 8.6 m³, температура от -25 до -18 °C, dimensions: 785x845x720 mm

Mastro VSFK120

optimal cooled volume of chamber - 1.8 m³, температура от -25 до -18 °C, dimensions: 760x620x970 mm

Mastro VSFK170

optimal cooled volume of chamber - 2.6 m³, температура от -25 до -18 °C, dimensions: 460x540x750 mm

Mastro VSFK200

optimal cooled volume of chamber - 3.4 m³, температура от -25 до -18 °C, dimensions: 760x540x800 mm

Mastro VSFK202

optimal cooled volume of chamber - 4.6 m³, температура от -25 до -18 °C, dimensions: 760x540x800 mm

Mastro VSFK203

optimal cooled volume of chamber - 8.6 m³, температура от -25 до -18 °C, dimensions: 760x540x800 mm

Mastro VSFK400

optimal cooled volume of chamber - 16.5 m³, температура от -25 до -18 °C, dimensions: 760x620x970 mm

Mastro VVK170

optimal cooled volume of chamber - 2.7 m³, температура от -25 до -18 °C, dimensions: 485x841x720 mm

Mastro VVK201

optimal cooled volume of chamber - 3.4 m³, температура от -25 до -18 °C, dimensions: 785x841x720 mm

Mastro VVK202

optimal cooled volume of chamber - 4.6 m³, температура от -25 до -18 °C, dimensions: 785x841x720 mm

Mastro VVK203

optimal cooled volume of chamber - 8.6 m³, температура от -25 до -18 °C, dimensions: 785x841x720 mm

Mastro VVTK400

optimal cooled volume of chamber - 16.5 m³, температура от -25 до -18 °C, dimensions: 760x1070x820 mm

Mastro VVTK501

optimal cooled volume of chamber - 28.9 m³, температура от -25 до -18 °C, dimensions: 1220x1100x860 mm

MBM FB-13NT

температура от -20 до -18 °C, dimensions: 800x845x409 mm

MBM FB-20N

температура от -20 до -18 °C, dimensions: 800x845x409 mm

MBM FB-6NT

температура от -20 до -18 °C, dimensions: 800x845x409 mm

Metos BF201 AZ CR-1P ZETA

температура от -18 до 3 °C, dimensions: 1200x1150x2230 mm

Metos BF201 DZ CR-1P ZETA

температура от -18 до 3 °C, dimensions: 1200x1150x2230 mm
1
2
3
next »

Monoblock unit – is a high-tech refrigerating device that combines a compression-condensation unit and air cooler. This equipment is usually made ​​of galvanized steel and can be easily mounted on the side wall of the walk-in cooler, which is generally made of sandwich panels. Monoblocks for public food facilities and freight outlets are set in the following way - air cooler is placed inside the walk-in cooler, and the compression-condensation unit - outside. They are connected by a special insulation blanket. The use of monoblocks enable the maintaining of the desired temperature of air in an isolated room (walk-in cooler). There are medium temperature and low temperature monoblock units. For large production premises are used industrial monoblock units consuming more energy than commercial monoblock units, designed for smaller capacity of walk-in coolers and equipped with additional functions such as heating of doorway. High-quality monoblock units work good in any time-of-year, regardless of the temperature outside, and provide secure storage of perishable foods required for the smooth operation of your catering facility.