Trash compactor

Electrolux WMSCDPFS

dimensions: 450x600x928, mains power: 400 V, 50/60 Hz, 1.1 kW

Electrolux WMSCDPLW

dimensions: 518x227.5x635.7, mains power: 400 V, 50/60 Hz, 1.1 kW

Electrolux WMSCDPRW

dimensions: 518x227.5x635.7, mains power: 400 V, 50/60 Hz, 1.1 kW

IMC IP400

work cycle - 14 sec, compression force - 3000 kgf/cm², dimensions: 580x600x1645, mains power: 230 V, 50 Hz, 0.75 kW

IMC IP500

work cycle - 23 sec, compression force - 4500 kgf/cm², dimensions: 675x678x1740, mains power: 230 V, 50 Hz, 0.75 kW

IMC IP600

work cycle - 23 sec, compression force - 5000 kgf/cm², dimensions: 840x870x1930, mains power: 230 V, 50 Hz, 0.75 kW

IMC IP700

work cycle - 17 sec, compression force - 1000 kgf/cm², dimensions: 840x870x1930, mains power: 230 V, 50 Hz, 0.75 kW

Santos 61

work cycle - 45 sec, press - 1300 kg, dimensions: 480x660x850, mains power: 230 V, 50/60 Hz, 0.28 kW

Santos 61V1

work cycle - 45 sec, press - 1300 kg, dimensions: 480x660x850, mains power: 120 V, 50/60 Hz, 0.26 kW

For the disposal of food waste and garbage in catering facilities are used briquetting or packing presses and press-containers. With the help of presses for packaging are made compact bales of waste from suitable for secondary use materials. Presses for briquetting of waste may be either horizontal or vertical. Horizontal presses are widely used when it is necessary to maximally automate briquetting of large quantities of waste. Vertical presses for briquetting of waste, in its turn, are used for large volumes of waste utilization. There is also another type - special presses for briquetting of waste, which serve for disposal of in-container products (cans, juice, milk, etc.). One more type of waste disposal equipment is press containers, the use of which significantly reduces the cost of rubbish removal. Comparing with conventional containers load capacity of press containers is much higher that is why the in the construction of them is used specific pressing engine. Waste in presses is stored to the full load, which is indicated by a sensor. Such equipment may be installed both indoors and outdoors. Presses for waste include pressing engine, as well as containers, which are divided into two kinds - stationary compactors or monobloc compactors. For the recycling of food waste are used as a rule, bio-compactors (a type of monoblock compactors).